Archive for Wc3 clan about the custom game Island Troll Tribes
  Forum Index -> Questions about ITT mechanics

let the wet swell moldy, and dry shrinkage

<p>careful, must not use the chemical composition of the poor quality products. 2, avoid alcohol, gasoline or other chemical solvents in addition to stains. If there is a stain on the surface of the furniture, do not be hard to rub, can be used to warm the tea stains will be removed gently, until the water evaporates in the original part of the coating with less Xu Guang wax, and then gently rub several times to form a </p>
<p>protective film. 3, avoid hard objects scratch. When cleaning, do not touch the furniture cleaning tools, usually pay attention to, do not let the hard metal products or other sharp impact of furniture, to protect its surface does not appear bumps. 4, avoid damp environment. In the summer, such as indoor pan tide, it is appropriate to use a thin glue will be separated from the ground contact with the ground part of </p>
<p>the furniture, while allowing the wall of furniture with the wall to keep the gap between the 0.5-1cm distance. 5, away from the heat. In winter, it is best to place the furniture in the distance from the heating flow around 1M, to avoid a long time of high baking, so that the local wood cracks, deformation and local deterioration of the film. 6, avoid direct sunlight. Outdoor sunlight should be avoided as a whole or </p>
<p>mix wood and plastic flooring<br />
anti oxidents wood products<br />
poultry plastic floor philippines</p> Forum Index -> Questions about ITT mechanics
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum